Ju’s research paper, “Influence of Thermal Processing on Resoloy Wire Microstructure and Properties” was published in Advanced Engineering Materials and made available online. Congratulations, Ju!

Jan 16, 2021
2021

John had an abstract titled “Effects of Thermal Processing on the Microstructure and Mechanical Properties of Additively Manufactured AlSi10Mg Parts” accepted for an oral talk at TMS 2021 in March. Congratulations, John!

Jan 13, 2021
2021

Jenna had an abstract titled “Thermomechanical Processing of Dilute Mg-Zn-Ca Alloys” accepted for an oral talk at TMS 2021 in March. Congratulations, Jenna!

Jan 10, 2021
2021

Prof. Weihs will be giving two invited talks at TMS 2021 in March. They are titled “Leveraging Griffith’s Energy Balance in Extreme Environments” and “Deformation Induced Precipitation (DIP) in Light Alloys: Theory and Experiments.” Congratulations, Prof. Weihs!

Jan 7, 2021
2021

Suhas’s poster, titled “Deformation Induced Precipitation (DIP): A Cohesive Processing Strategy to Strengthen Magnesium Alloys” was accepted for TMS 2021 in March. Congratulations, Suhas!

Jan 2, 2021
2021

Shane’s research published in ACS Sustainable Chemistry & Engineering was highlighted on a supplementary cover to the journal (Volume 8, Number 46). Congratulations, Shane!

Nov 15, 2020
2020

Shane et al published “Environmentally Friendly Chemical Time Delays Based on Interrupted Reaction of Reactive Nanolaminates” in ACS Sustainable Chemistry & Engineering. The article describes and characterizes a new method to create chemical time delays – devices that burn over a specific time period to ignite other pyrotechnic devices – which does not involve any of the environmentally hazardous materials typically employed for that purpose. Congratulations, Shane!

Nov 9, 2020
2020

Suhas published a communication discussing efforts to teach science using microscopy, titled “Looking at education through the microscope” in Nature Reviews Materials in their In the Classroom series. Congratulations, Suhas!

Sep 15, 2020
2020

John Fite et al published “Evolution of the microstructure and mechanical properties of additively manufactured AlSi10Mg during room temperature holds and low temperature aging” in Additive Manufacturing. Congratulations, John!

Jul 28, 2020
2020

Suhas and Prof. Weihs published an invited science communication article “A defect determines strength” in Nature Physics in their Measure for Measure series. The article was highlighted on the journal’s home page. Congratulations, Suhas!

Jul 17, 2020
2020

Shane et al published “Exploring material chemistry for direct ink writing of reactively formed conductors” in Materials Advances. This is the first paper published in a multi-year collaboration with the Charles Stark Draper Laboratory in Cambridge, MA, to develop novel materials for 3D printing reactively formed electrical conductors. Congratulations, Shane!

Jul 14, 2020
2020

Elliot’s co-authored paper, “Thermite reactivity with ball milled aluminum-zirconium fuel particles”, was published in Combustion and Flame. Congratulations, Elliot!

Jul 6, 2020
2020

Elliot’s paper “Designer direct ink write 3D-printed thermites with tunable energy release rates” from his internship at LLNL was featured on the front cover of Advanced Engineering Materials. Congratulations, Elliot!

Jun 30, 2020
2020

Suhas was named a 2020 Diversity Recognition Award recipient by the Johns Hopkins Diversity Leadership Council in recognition of his work towards fostering inclusion with the school and surrounding communities. Congratulations, Suhas!

Jun 29, 2020
2020

Elliot et al published “Measuring heat production from burning Al/Zr and Al/Mg/Zr composite particles in a custom micro-bomb calorimeter” as an open-access paper in Materials. Congratulations, Elliot!

Jun 24, 2020
2020

Suhas was elected as co-chair of the Climate, Culture, and Campus Experience sub-committee of the Homewood Council for Inclusive Excellence an advisory panel for the Deans at JHU. Congratulations, Suhas!

Jun 15, 2020
2020

Suhas was selected to lead one of the online sections of the Biomedical Engineering Innovation program , whose aim is to introduce biomedical engineering to high school students across the world. Congratulations, Suhas!

Jun 4, 2020
2020

Jenna was announced as a 2020 Recipient of a prestigious and highly competitive National Defense Science and Engineering Gradaute (NDSEG) Fellowship through the Army Research Office which will support her continued Ph.D. studies! See an announcement at the HEMI website here. Congratulations, Jenna!

May 15, 2020
2020

Shane was appointed as one of the Whiting School of Engineering representatives on the Provost’s PhD Education Student Advisory Committee, a committee of graduate students across all Doctoral degree granting divisions of the University who provide regular and direct feeback to the Provost’s office. Congratulations, Shane!

Apr 15, 2020
2020

Shane was elected as one of the Co-Chairs of the Graduate Representative Organization (GRO), the representative organization for graduate students across all departments and programs within both the Whiting School of Engineering and the Krieger School of Arts and Sciences. Congratulations, Shane!

Apr 13, 2020
2020